Jetta L4-1.8L Turbo (AWD) (2000)
Final Drive Fluid: Service and Repair
Changing Transmission Oil
4 Speed Automatic 01M
- Remove center noise insulation tray.
- Remove noise insulation from left long member.
- Place container under transmission.
- Remove ATF level plug from oil pan.
- Remove overflow line (arrow 2) through level hole.
- Drain ATF.
- Install overflow line.
- Install level plug and tighten hand-tight.
- Fill with 3 ltr. (3.2 qt) of ATF through filler line using VAG 1924.
- Start engine and shift through all selector lever positions with vehicle stationary.
- Check and top up ATF level.