Jetta L4-1.8L Turbo (AWD) (2000)
/Page-935001.png)
Transmission Position Switch/Sensor: Service and Repair
4 Speed Automatic 01M Remove & Install Multi-Function TR Switch
Multi-Function Transmission Range (TR) Switch -F125-
Removing and installing -F125-
-
Switch ignition off
-
Disconnect connector from multi-function TR switch.
-
Remove bolt and retainer.
-
Remove multi-function TR switch.
-
Replace seal.
Installation is performed in the reverse order.
-
Tighten bolt to 10 Nm (7 ft lb).
