Jetta L4-1.8L Turbo (AWD) (2000)
-
Release socket drive -1- and pull off grip -2-.
-
Turn torque wrench grip -2-through 180 ° and reinsert socket drive.
-
Set wrench direction of turn on socket drive to anti-clockwise.
-
Set torque wrench tightening torque to 80 Nm.
-
Fit 6 mm socket onto generator drive shaft.
-
Counter-hold multi point key 3400 with 17 mm ring spanner and tighten freewheel disc to 80 Nm by turning generator drive shaft anti-clockwise
with torque wrench.
-
Clip protective cap onto freewheel disc.