Jetta L4-1.8L Turbo (AWD) (2000)
-
Turn tightening device in direction of arrow to relieve tension on ribbed belt.
For ease of illustration, relieving belt pulley tension is shown with out charge air line.
-
Mark ribbed belt direction of rotation.
-
Remove ribbed belt.
-
Remove hex bolt from belt pulley.
Suction line and hose, removing
Suction line lower spring clip can only be opened with headlight removed.
Remove bumper for this.
-
Pull connector off intake line.
-
Open spring clamps -1-, -2- and -3- with special tool VAS 5024.
-
Remove suction hose -A- and suction line.