Jetta L4-1.8L Turbo (AWD) (2000)
Steering Wheel: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer Scan Tool
Diagnostic Trouble Code (DTC) memory, Erasing (Function 05)
NOTE: After erasing the DTC memory its contents will automatically be indicated. If the DTC memory cannot be erased, again check DTC memory
and repair malfunctions.
Requirements
-
All malfunctions repaired.
-
DTC memory checked.
After Diagnostic Trouble Code (DTC) memory has been successfully checked:
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press keys 0 and 5. (05 selects the "Erase DTC memory" function.)
Indicated on display:
Rapid data transfer
Q
05 Erase DTC memory
-
Confirm entry with key Q.
Indicated on display:
Rapid data transfer
->
DTC memory is erased
The DTC memory is now erased.
-
Press -> key.
Indicated on display:
Rapid data transfer
HELP
Select function XX
NOTE:
-
If this appears in the display, the test sequence is faulty.
Warning!
DTC memory was not checked
-
If this appears in the display, the test sequence is faulty.
Rapid data transfer
->
DTC memory was not checked
-
Adhere exactly to test sequence: First check DTC memory, if necessary repair malfunctions, then erase.
End Output (function 06)
-
Press buttons -0- and -6- to select function "End output".
Indicated on display:
Rapid data transfer
Q