Jetta L4-1.8L Turbo (AWD) (2000)
-
Moisten sealing lips with ATF before installing
-
Turn cap slightly when installing
11. Intermediate spring ring
-
With spring supporting shell and compression springs
12. Piston
-
Sealing lips are vulcanized to piston
-
Moisten sealing lips with ATF before installing
-
Turn piston slightly when installing
13. Clutch housing
-
Before inserting the inner plate carrier corrugated washer (item 8), insert inner and outer plates in the clutch see Fig. 3
Fig. 1 Removing and installing circlip
-
Press piston cap with intermediate spring ring down far enough for circlip (arrow) to be inserted in groove.
Fig. 2 Installing thrust plate and plates onto inner plate carrier
-
Install thrust plate -a- with smooth side facing inner plate and stepped side towards inner plate carrier.
-
Install 3 inner plates -b- and 2 outer plates -c-.
-
Clip in supporting ring with step (arrow).
Note:
-
Locate tabs correctly.
-
Installing corrugated washer and further plates in clutch housing.