volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Input Shaft, M/T > < Fluid - M/T|Capacity Specifications|Page 4408
Page 1
background image

Fluid - M/T: Service and Repair

5 Speed Manual 02J

Transmission Oil, Checking 

Gear oil specification. Refer to Specifications
-

Remove insulation tray below engine/transmission,), if installed,

-

Remove plug (arrow) to check oil.

Oil level is correct when transmission is full to lower edge of filler hole,
-

Reinstall plug (arrow).

Adding Transmission Oil 

-

Remove plug (arrow).

-

Top up oil to lower edge of filler hole.

-

Reinstall plug (arrow).

-

Start engine, engage gear and allow transmission to turn for approx. 2 minutes.

-

Switch off engine and remove plug (arrow).

-

Top up oil to lower edge of filler hole again.

-

Reinstall plug (arrow).

Input Shaft, M/T > < Fluid - M/T|Capacity Specifications|Page 4408