Jetta L4-1.8L Turbo (AWP) (2004)
Vacuum Pump: Service and Repair
Brake system vacuum pump -V192-, removing and installing
There are no provisions for servicing the brake system vacuum pump -V192-. If a malfunction is detected the brake vacuum pump -V192- must be
replaced.
The brake system vacuum pump -V192- is located lower left on the subframe.
Removing
-
Remove bolts -1- on bracket for brake system vacuum pump -V192-.
-
Pull hose -arrow- off brake system vacuum pump -V192-.
-
Take out brake system vacuum pump -V192-.
-
Bracket -arrow- for brake system vacuum pump -V192-.
-
Remove lock nut -2- from bolt -1-.
-
Remove bolt -4-.
-
Take bracket out.
-
Remove bolts -3- to disassemble the bracket -arrow- further.
Installing
Install in reverse order.
Tightening torques
Nut -2- to bracket: 20 Nm (15 ft. lbs.)
Bolts -3-to bracket: 8 Nm (71 inch lbs.)
Bolt -4- to bracket: 20 Nm (15 ft. lbs.)
Torx socket head bolt for brake vacuum pump -V192- to bracket: 8 Nm (71 inch lbs.)