Jetta L4-1.8L Turbo (AWP) (2004)
Knock Sensor: Service and Repair
Parts Of The Ignition, Removing And Installing (Vehicles With Engine Code AWP, AWW)
1
Connector
-
Black, 4-pin
2
Ignition coil with power output stage (Ignition Coil 1 with Power Output Stage -N70-, Ignition Coil 2 with Power Output Stage -N127-, Ignition
Coil 3 with Power Output Stage -N291-, Ignition Coil 4 with Power Output Stage -N292-)
3
Snap ring
-
for ignition coil with power output stage (Ignition Coil 1 with Power Output Stage -N70-, Ignition Coil 2 with Power Output Stage -N127-,
Ignition Coil 3 with Power Output Stage -N291-, Ignition Coil 4 with Power Output Stage -N292-)
4
Spark plug, 30 Nm
-
remove and install with 3122 B
-
Type and spark plug gap, test data, spark plugs
5
Connector
-
black, 3-pin
-
Terminals of sensor and connector are gold-plated
6
10 Nm
7
Camshaft Position (CMP) Sensor -G40-*
8
25 Nm
9
Washer
-
Conical
10
Face plate
-
For Camshaft Position (CMP) Sensor 2 -G163-
-
note position when installing
11
20 Nm
-
Tightening torque affects function of Knock Sensor (KS)
12
Knock Sensor (KS) 1 -G61-*
-
Terminals of sensor and connector are gold-plated
-
Component location: Cylinder block, intake side
13
Knock Sensor (KS) 2 -G66-*