Jetta L4-1.8L Turbo (AWP) (2004)
12
Pressure retention valve
13
Vent line
-
Black
-
Check for secure fitting
14
Fuel tank
15
Clamping washer
16
Heat shield
-
for fuel tank
17
25 Nm
18
Tightening nut, 2 Nm
19
Cover for fuel tank
20
Tension strap
-
Note varying lengths
-
Installation position: Locating point (hole) faces direction of travel
21
Supply line
-
Black
-
Check for secure fitting
-
to remove from fuel filter, press release buttons on connecting piece
-
to fuel supply line at fuel distributor, Item 8
22
Fuel filter
-
Installation position: Arrow points in direction of flow
23
Screw clamp
24
Vent line
-
white
-
Check for secure fitting
-
Clipped in sideways at fuel tank
25
Seal
-
Replace if damaged
-
to install, place into opening of fuel tank when dry
-
only coat with fuel when installing Fuel Pump (FP) flange
26
Fuel pump
-
Installation position at fuel tank, See Fig. 1
-
Check fuel pump
-
Clean strainer if dirty
27
Union nut, 75 Nm
-
Use ring nut spanner 3217 to remove and install
28
Supply line
-
Black
-
Check for secure fitting
-
Clipped in sideways at fuel tank
-
to remove from flange and fuel filter, press release buttons on connecting piece
29
Return line
-
blue or with blue marking
-
Clipped in sideways at fuel tank
-
Check for secure fitting
-
to remove from flange, press release buttons on connecting piece
30
Connector
-
Black, 4-pin
-
for Sender for fuel gauge -G- and Fuel Pump (FP) -G6-
31
10 Nm
Fig. 1 Installation position of fuel pump flange