volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 8104 > < Procedures|Page 8102
Page 25
background image

1

-

Side curtain protection

2

-

Catches

3

-

Connector

4

-

Screw
-

Qty. 7

-

5 Nm

5

-

Igniter

Side Curtain Protection, Driver And Passenger Sides, Removing and Installing (Golf Wagon/Jetta
Wagon)

Side Curtain Protection, Driver And Passenger Sides, Removing And Installing (Golf Wagon/Jetta Wagon)

NOTE:

-

Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.

-

Observe notes regarding coding in radio operators manual before disconnecting battery.

-

After connecting battery, vehicle options (radio, clock, electric window regulator) must be checked according to repair manual and/or user manual.

-

Technicians must electrostatically discharge themselves by touching door lock or vehicle body briefly before separating igniter and ground (GND)
wires.

Removing

-

Disconnect battery Ground (GND) strap.

-

Remove upper A pillar trim.

-

Remove upper B-pillar trim.

-

Remove upper C-pillar trim.

-

Removing D-pillar trim.

-

Molded headliner, removing
-

With sunroof.

-

without sunroof.

CAUTION:
-

Observe safety precautions for working on airbags.

-

Electrostatic charges may result in involuntary deployment of airbag. Therefore, mechanic must be electrostatically discharged before

Procedures|Page 8104 > < Procedures|Page 8102