Jetta L4-1.8L Turbo (AWP) (2004)
Constant Velocity Joint: Service and Repair
Triple-Rotor Joint AAR 3300I, Disassembling and Assembling
Triple-rotor joint AAR 3300i, disassembling and assembling
Disassembling
-
Open clamp on joint and slide back protective boot.
-
Open clamp on shaft and slide back joint protective boot.
-
Pull the joint off the axle shaft.
-
Remove circlip.
1 - Pliers (commercially available) VW161A
-
Insert axle shaft into press.
-
Press out star of the axle shaft.
-
Pull protective boot off shaft.
-
Clean shaft, joint and groove for oil seal.
Assembling
-
Slide small clamp for joint protective boot onto shaft.
-
Slide joint protective boot onto shaft.
-
Slide joint onto shaft.
Assembling triple roller star
Conical-type axle shaft