Jetta L4-1.8L Turbo (AWP) (2004)
/Page-1684003.png)
-
Install joint protective boot.
-
Install hose clamp.
Note: For a better alignment of the multi-point socket head bolts when mounting the axle shaft, it is necessary that the clamping ear of the clamp -
arrow A - is placed between the fixing flanges from the joint -arrow B - .
-
Tighten hose clamp with hose clamp pliers V.A.G. 1275 .
-
Tighten small hose clamp with hose clamp pliers
