Jetta L4-1.8L Turbo (AWP) (2004)
Fig. 1 Separating cover from gear shift knob and assembling to gear shift knob
-
Turn boot inside out.
-
Carefully pry clamping sleeve (arrow) off with a screwdriver and pull gear shift knob out.
Installation is carried out in the reverse sequence. Also, note the following:
-
Insert gear shift knob in cover.
-
Push clamping sleeve onto gear shift knob and engage.
-
Install gear shift knob and boot together.
Gear Lever and Gear Lever Housing Servicing
5 Speed Manual 02J
Gear lever and gear lever housing, servicing
Note: Lubricate all mountings and sliding surfaces with Polyurea grease Part No. G 052 142 A2.