Jetta L4-1.9L DSL Turbo (AAZ) (1997)
-
Drive out expander pins -5- (left and right) toward inside.
-
Front expander pin will be pressed against seat frame.
-
Press expander pin downward from above using screwdriver.
-
Remove cover -6- from backrest frame.
-
Remove Phillips-head screw -11-.
-
Pull off retainers -7- (left and right).
-
Pull backrest frame off mounting pin -13-.
Installing
-
Check bushings -12- (left and right) for damage; replace if necessary.
-
Replace Phillips-head screw -11- (with thread locking compound).
-
Remove adhesive residue from nut threads with tap or thread chaser.
-
Coat threads of new screw with locking compound AMV 197 000 01.