Jetta L4-1.9L DSL Turbo (AAZ) (1997)
-
Shells with oil groove installed in block.
-
Do not interchange used bearings.
Upper Main Bearing Thrust Washers (5)
-
Install on bearing cap No. 3.
-
Refer to illustration for installed position.
Crankshaft (9)
-
Check Crankshaft Axial Clearance:
-
New: 0.07 to 0.17 mm.
-
Wear limit: 0.37 mm
-
Check Main Bearing Journal Radial Clearance Using Plastigage:
-
New: 0.03 to 0.08 mm
-
Wear limit: 0.17 mm
-
Do not allow the crankshaft to rotate while measuring radial clearance.
Lower Main Bearing Thrust Washers (10)
-
Install at block bearing No. 3.
-
Refer to illustration for installed position.