Jetta L4-1.9L DSL Turbo (AAZ) (1997)
NOTE:
-
Ensure that a wide ball groove in outer ring -a- and a narrow groove in hub -b- are together on one side when hub is pivoted into outer ring.
-
Chamfer on inside diameter of ball hub (splices) must face larger diameter of joint
-
Swivel in ball hub with cage and balls in outer ring,
NOTE: Hub must be pivoted out of cage -arrows- until/ balls are spaced to fit grooves.
-
Press cage firmly -arrow- until hub swings fully into position.
NOTE: The joint is correctly assembled when the ball hub can be moved in and out over the full range of axial movement by hand.