Jetta L4-1.9L DSL Turbo (BEW) (2004)
Removing and installing is only possible when sub-frame is removed.
Pressing out bonded rubber bushing
Note: Use lubricant to press in the bonded rubber mounting e.g. lubricant G 294 421 Al.
Pressing in bonded rubber bushing
Threads In Longitudinal Member, Servicing
Threads in longitudinal member, servicing
It is possible to service the threads of the welded nuts in the longitudinal member depending on certain conditions.
^
Servicing work may only be carried out once per thread.
^
If servicing is necessary after this, the nuts must be replaced.
^
Observe the operating instructions of the VAS repair kit.
Caution: When drilling, it is essential that eye protection be worn!
^
Have the thread repair checked by the responsible foreman or next person in charge.
^
Correct any damage to the underbody sealant layer
^
Only use the VAS repair kit listed in the table for service work
VAS thread repair kit