Jetta L4-1.9L DSL Turbo (BEW) (2004)
-
Use counterhold T1 0051 and tighten hub securing bolt - 1 100 Nm. Tightening torque.
-
Push camshaft pulley onto hub.
Note: The toothed segment - arrow - of the camshaft pulley must be on top.
-
Align camshaft pulley to central position in elongated holes.
-
Hand tighten securing bolts - 1 - to camshaft pulley so that there is no play.
-
Lock hub with locking pin 3359 .
-
Install toothed belt and tension.
-
Install tandem pump.
Note: After installing new hydraulic lifters the engine must not be started for approximately 30 minutes. The hydraulic compensation elements
must settle (otherwise valves will strike pistons).