Jetta L4-1.9L DSL Turbo (BEW) (2004)
Tail Lamp: Service and Repair
Rear Light Housing, Removing and Installing
Wagon
Rear Light Housing (Jetta Wagon), Removing And Installing
Removing
- Switch off all electrical consumers, switch off ignition key and remove ignition key.
- Remove rear luggage compartment side panel trim/storage box (left or right):
- Remove nuts -arrows- (Qty. 3) and remove housing.
- Remove bulb holder.
Installing
- Install bulb holder.
- Insert housing into body opening.
- Tighten nuts (3 Nm)
- Install applicable rear luggage compartment side panel trim/storage box.
Sedan
Rear Light Housing (Jetta), Removing And Installing
Removing
-
Switch off all electrical consumers, switch off ignition key and remove ignition key.
-
Remove rear luggage compartment side panel trim (left or right):