Jetta L4-1.9L DSL Turbo (BEW) (2004)
/Page-1366001.png)
Tie Rod: Service and Repair
Tie Rod, Removing and Installing
Tie rod, removing and installing
Special tools, testers and auxiliary items required
^
Holding fixture VW313
^
CV joint boot clamp tool V.A.G. 1275
^
Torque wrench V.A.G. 1332
^
Open jaw insert, 34 mm V.A.G. 1332/5
^
Transmission support T10108
Removing
The tie rods can only be removed/installed with the steering gear removed.
-
Seal line connections on power steering gear if not already done.
-
Clean outside of power steering gear in the area of the boot.
-
Open clamp and slide boot back.
