Jetta L4-1.9L DSL Turbo (BEW) (2004)
If the vehicle is not secured, there is a risk that it may slip off the hoist.
-
Remove the plugs from the trailing arm - 3 - and tighten the tensioning strap .
1 - Support arm of lifting platform
2 - Tightening strap T10038
System Sensor G76 from rear axle.
Continued for all vehicles
-
Unclip brake cable from support on rear axle body - arrow A - and remove from supports - arrow - .
-
Pull off clip -1 - .
-
Place engine/transmission jack V.A.G. 1 383A with cloth under brake line.
-
Disconnect brake lines.
-
Remove securing bolts from brake caliper housing, while counter-holding on guide pins.