Jetta L4-1.9L DSL Turbo (BEW) (2004)
-
Insert axle shaft in press.
-
Press cover - 1 - into triple roller joint until circlip can be installed.
-
Insert circlip, make sure seated correctly.
-
The circlip must be heard when it seats!
-
Install joint protective boot.
-
Position the triple roller joint approximately in the middle of the sliding part. See distance between min. and max.
-
Hold triple roller joint in this position and lift the boot slightly - arrow -.
-
Install hose clamp.
-
This allows a possible vacuum inside the boot to escape.
Note: For a better alignment of the multi-point socket head bolts when mounting the axle shaft, it is necessary that the clamping ear of the clamp -
arrow A - is placed between the fixing flanges from the joint -arrow B - .