Jetta L4-1.9L DSL Turbo (BEW) (2004)
Rear Door Window Regulator: All Technical Service Bulletins
Body - Door Windows Separate From Regulator Clamps
Door Windows, May Separate from Window Regulator Clamps
64 07 04
May 18, 2007
2011169 Supersedes Technical Bulletin Group 64 number 06-04, dated May 15, 2006 due addition of City Golf, City Jetta Models
Condition
Vehicle Information
Technical Background
Door windows may separate from window regulator clamps under certain operating conditions. In order to provide additional retention capability for the
window / window regulator clamp assembly, perform the following repair procedure outlined in this bulletin.
Production Solution
No production change required.
Service
While performing this Technical Bulletin:
^
Check if vehicle you are working on is equipped with original plastic window clamps.
If original plastic clamps are installed:
^
Perform Technical Bulletin Group 64 number 0607, You must clean glass, scuff rubber isolators and apply adhesive as described in this bulletin
when reinstalling the window glass.
This will ensure the Customer's vehicle has new style clamps with the window glass bonded to the rubber isolator as described here.
If new style cast clamps are installed:
^
Continue with this Bulletin.
Tip:
See Repair Manual, Group 64 Glass, Window regulators, for instruction concerning removal, installation and adjustment of door glass.
^
Remove both front door interior trim panels to access window regulator clamps, see Repair Manual Group 70, Interior Trim, Door Trim.