volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Headlamp Adjusting Screw > < Headlamp Alignment Sensor|Specifications|Page 10937
Page 2
background image

-

Disconnect electrical connection -arrow-.

-

Remove screws -1- and remove Left Rear Level Control System Sensor G76 -2-.

Installing: 
Install in reverse order of removal, noting the following:

-

Tighten all fasteners according to value in table.

-

Check Left Rear Level Control System Sensor G76.

-

Perform headlamp basic setting 20.1

NOTE: 
-

If the vehicle level sensors are replaced, the values of the sensor must be checked and headlamp basic setting must be performed.

-

If values of vehicle level sensors are outside the tolerance range, basic setting of headlamps cannot be performed.

Headlamp Adjusting Screw > < Headlamp Alignment Sensor|Specifications|Page 10937