Jetta L4-1.9L DSL Turbo (BRM) (2006)
/Page-1089003.png)
-
Carefully release connector of the Transmission Input Speed (RPM) Sensor (G182) with Clutch Oil Temperature Sensor (G509) using a small
screwdriver - 1 - and at the same time carefully pry out connector using a second screwdriver - 2 -.
‹› Do not pull on wire!
-
Remove connector.
-
Remove wire from retaining tabs - arrows -.
-
Loosen bolts - 1 - through - 10 - in specified order and remove.
