Jetta L4-1.9L DSL Turbo (BRM) (2006)
Windshield Washer Hose: Procedures
Corrugated Hoses, Repairing
Corrugated Hoses, Repairing
Special tools, testers and auxiliary items required
-
Hot air gun VAS 1978/14 or
-
Hot air gun kit VAS 5179 as illustrated
NOTE:
-
Area to be repaired must not be under stress of stretching or bending.
-
If damaged area is longer than 20 mm, a new section of corrugated hose must be obtained, and two sets of adapters inserted using following
the following procedure.
-
Trim and remove damaged sections of hose.
-
Choose matching repair adapters -2- and -3- and appropriate shrink tubing from Parts Catalog.
-
Carefully warm end of hose -1-.
-
Insert repair adapter -2- into hose -2- - arrow A -.
-
Carefully warm end of hose -4-.
-
Insert repair adapter -3- into hose -4- - arrow B -.
-
Trim shrink tubing sections so that corrugated hose is covered a minimum of 20 mm - dimension x -.
-
Slide shrink tubing over corrugated hose, attach adapters together and secure repair with shrink tubing.
Windshield and Rear Window Washer System, Repairing