Jetta L4-1588cc 1.6L DSL SOHC Turbo (1985)
Front door lock assembly with plastic sleeve (arrow), L/S shown
-
take out hex head screws and partially remove lock
-
remove any burrs from activating finger before installing plastic sleeve
-
install door latch plastic sleeve (arrow), on activating finger
-
reinstall door lock
-
adjust striker pin if required
-
check lock function
Rear door lock plastic sleeve, installing
Part required
Plastic sleeve part number 178 839 149
Work sequence
Rear door lock assembly with plastic sleeve (arrow), L/S shown
-
take out hex head screws and partially remove lock
-
remove any burrs from activating finger before installing plastic sleeve
-
install door latch plastic sleeve (arrow), on activating finger
-
reinstall door lock
-
adjust striker pin if required
-
check lock function