Jetta L4-1588cc 1.6L DSL SOHC Turbo (1985)
(8) High pressure service valve
(9) Low pressure switch
(10) Oil drain plug
(11) A/C compressor
-
Remove protective caps from A/C service valves.
-
Close both valves on A/C manifold gauge set.
-
Connect hose 1 from low pressure gauge to low pressure service valve.
-
Connect hose 3 from high pressure gauge to high pressure service valve.
-
Connect manifold gauge hose (2) to inlet connection (4) on refrigerant recovery recycling unit (5).
CAUTION: Always follow manufacturer's instructions when using a refrigerant recovery/recycling unit.
-
Following manufacturer's instructions, discharge A/C system into refrigerant recovery/recycling unit.
-
Close manifold gauge valves when refrigerant is fully discharged.
-
Disconnect manifold gauge set hose from service valves.
-
Reinstall protective caps on service valves.
CAUTION: Do not leave A/C system open for long periods of time. Prolonged exposure to the air will contaminate the system and necessitate
replacement of receiver/drier and possibly other system components.
-
Disconnect electrical connector from A/C compressor clutch, to prevent accidental compressor operation while system is discharged.
-
Remove the center console. On manual transmission cars, first remove the gearshift lever knob and the gearshift boot.
-
On automatic transmission cars remove the selector lever cover plate.
