Jetta L4-1588cc 1.6L DSL SOHC Turbo (1985)
Synchronizer Ring: All Technical Service Bulletins
M/T - 3rd/4th Gear Synchronizer Hub Assembly Correction
Group: 35
Number: 91-03
Date: September 30, 1991
Subject:
Correction to 3rd/4th gear synchronizer hub assembly
Model(s):
Golf/Jetta with 020 5-speed trans, Model Years 1985-91
3rd/4th gear synchronizer hub, installing
When assembling the input shaft, the correct way to install the 3rd/4th gear synchronizer hub is as follows:
^ install with chamfer on hub inner splines (white arrow) facing 3rd gear
^ install with groove (black arrow) facing 4th gear
The current microfiche repair manual incorrectly describes this assembly procedure.
