Jetta L4-1588cc 1.6L DSL SOHC Turbo (1985)
Shift rod clamp bolt (arrow)
4. Loosen the shift rod clamp bolt and remove the bolts holding the relay shaft bracket to the body. Slide the bracket off the shift rod.
5. Working beneath the car, remove the bolts holding the shift lever housing to the body.
6. Working inside the passenger compartment, remove the two nuts holding the ball retaining plate to the housing. Push the rear shift rod bearing into
the shift housing, and pull out the shift lever with the shift rod.
7. Installation is the reverse of removal. Remove any old grease from the joints and pivot points and lubricate them with molybdenum disulphide
grease (Volkswagen part no. G 000 602).
