Jetta L4-1588cc 1.6L DSL SOHC Turbo (1985)
Window Glass: All Technical Service Bulletins
Bonded Windshields - Removing/Installing
Applies To
JETTA
(from 1985 M..Y.)
Group
64
Subject Windshield
Part Identifier 6414
Key Points Bonded windshields
^
Removing/installing
^
Replacing
Supercedes Product Circular, Group 64, 85-02
H 001
Number
87-02
April 28, 1987
Bonded windshield, removing
Tools required
^
Cutting tools for glass, VW 1351
Obtainable locally:
utility knife pliers cutting wire (piano wire), 0.5 mm (0.20 in.) dia. or approx. 24 American Wire Gauge, 14-16 in. length needle nose pliers heat gun
Work sequence
-
remove both windshield wiper arms
-
remove A-pillar trim moldings
-
remove inside rear view mirror
WARNING
Wear protective goggles and leather gloves when removing and installing glass.
CAUTION
Attach masking tape to body around entire windshield perimeter to protect paint.
