Jetta L4-1781cc 1.8L SOHC (ACC) Can (1995)
Brake Caliper: Service and Repair
Front
VW II Caliper
Component Notes And Information
NOTE:
^
Suring service procedures, refer to the illustration above and the information below.
^
When repairing, apply a thin coat of brake fluid to cylinders, pistons and seals.
^
Install all parts in repair kit
^
During removal and installation procedures, refer to the component location illustration above and component notes below
1
Dust boot
-
Do not damage when installing piston
2
Piston
-
Removing and installing, refer to procedures below
-
Coat lightly with brake fluid before installing
3
Brake caliper
4
Piston seal
-
Remove using modified VAG 1474/5, refer to procedures below
Removal
CAUTION:
^
Place a wooden block in the caliper to prevent damage to the piston.
^
Use only enough air pressure to force the piston out.
-
Force piston out of caliper using compressed air.
WARNING: Always wear safety goggles when working with compressed air.