Jetta L4-1781cc 1.8L SOHC (ACC) Can (1995)
Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair
LEGEND
1
Mounting
2
Bolt
3
Radiator
4
V-belt
5
Guide Ring
6
Coolant Fan
7
Coolant Hose, Upper To Connector Pipe
8
Coolant Hose, Lower To Coolant Pump
9
Auxiliary Fan
10
Fan Shroud
11
Connector
12
Cover
13
Expansion Tank
14
To Coolant Pipe Or Connector Flange
15
To ATF Cooler
16
To Cylinder Head
17
Cap
18
Coolant Fan Control
19
Rubber Bushing
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Bolt (2)
-
Tighten to: 10 Nm (7 ft. lbs.).
Radiator (3)
-
After replacing radiator, replace coolant.
V-belt (4)
-
Only with optional equipment.
Guide Ring (5)
-
Note installed position.
-
Attached to fan shroud with clips.