Jetta L4-1781cc 1.8L SOHC (RV, PF) (1989)
Tighten the screws (C) when the adjustment is correct as shown, and install the spring.
4. Turn the crank 1/2 turn to open the sunroof, then remove the crank handle. Remove the interior dome light, and pry out the crank handle trim
panel at the rear. Remove the mounting screws (arrows) from the cable drive as shown, and remove the cable drive with the drive gear from above.
5. Push the sunroof open and shut several times by hand, then adjust the sunroof until it is square with the opening in its partly-open position. Install
the cable drive so that the drive gear engages the cables. Install the cable drive screws and crank trim panel, and check that the crank handle rests
in the panel when the roof is closed. Open the sunroof half-way and install the trim panel.