Jetta L4-2.0L (AEG) (2000)
Speaker: Service and Repair
Bass Loudspeakers, Front and Rear
To replace a loudspeaker, the door trim or side panel must first be removed. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair
-
Disconnect harness connector.
-
Drill off pop rivets (arrows) with appropriate drill and remove defective speaker.
NOTE: Remove all drill shavings from door or corrosion damage will occur. If paint damage occurs during drilling, repair immediately
-
Secure new speaker using special pop rivets of appropriate length and diameter (note part number!).
Do not forget rubber ring between trim and loudspeaker when reinstalling door trim.