Jetta L4-2.0L (AEG) (2000)
Brake Bleeding: Service and Repair
Without Pressure Bleeder
Brake System, Bleeding Without Pressure Bleeder
-
Build-up brake pressure in brake system by pumping brake pedal,
-
Connect hose from bleeder bottle to brake bleeder valve at each wheel in turn.
-
Open bleeder valve.
-
Hold brake pedal down, close bleed screw.
Note:
^
The brake fluid level in the reservoir must not fall below the MIN mark during bleeding.
-
Release brake pedal.
-
Repeat operation until brake fluid flows without air bubbles.