Jetta L4-2.0L (AEG) (2000)
Brake Caliper: Service and Repair
FS III Front Brake Calipers
Servicing
FS III Front Brake Calipers, Servicing
Note:
^
Install all parts supplied in the repair kit.
^
New brake calipers are filled with brake fluid and are pre-bled.
^
Apply a thin coat of lubricant, Part No. G 052 150 A2 to brake cylinders, pistons and seals.
1. Dust cap
2. Bleeder valve
^
Apply a thin coat of assembly lubricant G 052 150 A2 to threads before installing.
3. Cap
^
Install in mounting bushing.
4. Guide Pin, 28 Nm (21 ft. lbs.)
^
Removing and installing. Refer to Front brake caliper piston, removing and installing.
5. Mounting bushing
^
Install in brake caliper housing.
6. Brake caliper housing
7. Protective seal
^
Removing and installing
8. Piston
^
Removing and installing
^
Before installing apply a thin coat of assembly lubricant G 052 150 A2 to piston.
9. Piston seal
^
Removing and installing.
Front Brake Caliper Piston, Removing and Installing
Front Brake Caliper Piston, Removing And Installing
Special Tools And Equipment Required