Jetta L4-2.0L (AEG) (2000)
-
Install 10-222A support with legs 10-222A/1 as shown.
-
Remove overflow reservoir for coolant (hoses remain connected).
-
Remove reservoir for power steering fluid (hoses remain connected).
-
Remove bolts (arrows) and engine mount.
-
Remove vibration damper/belt pulley.
-
Remove camshaft drive belt guard center and lower sections.
-
Remove bolts for engine bracket from cylinder block (arrows).
Note:
-
To loosen front screw from bracket, raise engine slightly using the support.
-
Mark direction of rotation on belt.
-
Release belt tension and take off belt.