Jetta L4-2.0L (AEG) (2000)
Explanation of 4 digit number block
If the specified value is obtained:
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.
-
Switch ignition off.
Continuation
If the idle speed is not obtained:
-
Carry out adaptation of Engine Control Module (ECM) to throttle valve control module. See: Computers and Control Systems/Testing and
Inspection/Component Tests and General Diagnostics/Engine Control Module (ECM), Adapting to Throttle Valve Control Module
-
Carry out test drive.
Observe the safety precautions when carrying out a road test. See: Service Precautions/Technician Safety Information
-
Check DTC memory again.
-
Repeat idling check.
If the specified values are not obtained again:
-
Check throttle valve control module. See: Computers and Control Systems/Testing and Inspection/Component Tests and General
Diagnostics/Throttle Valve Control Module, Checking
-
Check signals from/to A/C compressor. See: Computers and Control Systems/Testing and Inspection/Component Tests and General
Diagnostics/Air Conditioning System Signal, Checking
-
Check engine operating mode. See: Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Engine
Operating Conditions, Checking