Jetta L4-2.0L (AEG) (2000)
Shifter A/T: Service and Repair
4 Speed Automatic 01M
Servicing
Special Tools And Equipment:
-
Torque wrench VAG 1331 (or equivalent)
-
Feeler gauges
WARNING!
-
Before working on running engine, move selector lever into "P" and apply parking brake.
Checking
-
Shift selector lever to "P" and switch ignition on.
-
Brake pedal not depressed:
Selector lever is locked and cannot be shifted out of "P". Solenoid blocks selector lever,
-
Brake pedal depressed:
Shift lock solenoid releases selector lever. It is possible to shift into a driving gear.
Shift Selector Lever in "N" Position, Checking
-
Ignition on
-
Brake pedal not depressed:
Selector lever is locked and cannot be shifted out of "N". Shift lock solenoid blocks selector lever.
-
Brake pedal depressed:
Shift lock solenoid releases selector lever. It is possible to shift into a driving gear.
Note:
-
The starter must not operate in the selector lever positions "1" "2", "3", "D" and "R".
-
When traveling at speeds above 5 km/h (3 mph) and shifting to "N ", shift lock solenoid must not engage and block selector lever. Selector
lever can be shifted into a driving gear.
-
When traveling at speeds below 5 km/h (3 mph) (almost stopped) and shifting into selector lever position "N", shift lock solenoid must not
engage until after approx. 1 sec. Selector lever cannot be shifted out of "N" position until brake pedal is depressed.
Removing and Installing
Selector lever, removing and installing
-
Obtain radio code on vehicles with coded radio.
-
Disconnect battery ground strap.