Jetta L4-2.0L (AZG) (2004)
/Page-767003.png)
15. Oxygen Sensor (02S) Behind Three Way
16. 5 Nm
17. 10 Nm
18. Heat shield
^
For catalytic converter
19. 25 Nm
^
Always replace
20. Sensor -1- for exhaust temperature -G235 45 Nm
^
Removing and installing with 3337, separate connector - Fig 1
21. Seal
^
Always replace
22. Exhaust manifold
23. Seal
^
Always replace
Fig. 1 Connectors, installed location
1. Protective housing on vehicle underside right side
2. For Sensor -1- for exhaust temperature -G235
3. For Heated Oxygen Sensor (H02S) -G39
4. For Oxygen Sensor (02S) in Center Three Way Catalytic Converter (TWC)1 bank 1 -G465
5. For Oxygen Sensor (02S) Behind Three Way Catalytic Converter (TWO) -G1 30
