Jetta L4-2.0L (AZG) (2004)
Engine Control Module: Programming and Relearning
With Generic Scan Tool
The manufacturer does not provide procedures for Adapting Functions and Components with a generic scan tool.
With Manufacturer's Scan Tool
Adapting components and functions
Special tools and equipment
-
VAS 5051 Vehicle Diagnosis, Testing and Information System
-
Diagnostic cable VAS 5051/1 or VAS 5051/3
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051 as follows:
-
Plug connector of diagnosis cable VAS 5051/1 or VAS 5051/3 to Data Link Connector (DLC) (arrow).
-
Switch tester on (arrow).
The tester is operationally ready when a picture (photograph) of a vehicle appears on the display.
-
Switch ignition on.
-
Touch key on screen for: Guided Fault finding.
-
Select one after another:
^
Brand
^
Model
^
Model year
^
Variant
^
Engine code
-
Confirm data as entered:
Note: Wait until the tester has read all the available control modules (vehicle system test).