Jetta L4-2.0L (AZG) (2004)
3
-
Securing lever
Installing
-
Insert ignition key in lock cylinder and turn to position "Drive".
-
Release securing lever using wire (approx. dia. 1.2 mm) and insert lock cylinder in steering lock housing.
NOTE:
- Where applicable, ensure immobilizer induction coil electrical connection orientation in lock cylinder housing guide.
-
Pull wire out of lock cylinder and ensure lock cylinder is secured properly in steering lock housing.
-
Reconnect immobilizer reading coil electrical connector -arrow- to lock cylinder.
-
Install steering column switches and steering wheel.