volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Door Lock Knob|Service and Repair|Page 8735 > < Door Lock Cylinder|Service and Repair
Page 1
background image

Door Lock Knob: Service and Repair

Locking Knob For Locking Rod, Removing And Installing

Following descriptions of removing and installing locking knob must always be observed.

If disregarded, locking rods may rotate out of front door locks and relays may rotate into rear doors/damage mounts.

Removing

Right front and left rear door

-

Unscrew locking knob 180° to left.

-

Remove locking knob upward - arrow -.

Installing

Right front and left rear door

-

Attach locking knob onto locking rod with marking -small point on top side- toward vehicle interior side.

-

Press locking knob onto locking rod only as far until corrugation is at height of door trim.

-

Then screw locking knob 180° to left.

When locked, locking knob can be approx. 02 mm over door trim.

Removing

Left front and right rear door

-

Unscrew locking knob 180° to right.

Door Lock Knob|Service and Repair|Page 8735 > < Door Lock Cylinder|Service and Repair