Jetta L4-2.0L (BEV) (2004)
CAUTION:
-
Make sure that the stoplights cable passes through the central hole drilled
-
Make sure that the grommet attached to the stoplights cable fits in central hole
-
Avoid squeezing stoplights cable with spoilers central base
-
Fasten spoiler using a screw on each of outer holes drilled.
-
Tightening torque (1.5 Nm)
-
Pass cable through center rectangular hole inside rear lid - 1 -.
-
Apply electrical terminals and connectors following Wiring harness repair kit VAS 1978 instructions.
-
Insert wiring into hose - 2 -.
-
Attach cable into clip - 3 -.
-
Connect terminal into harness connector and attach into connector holder - 4 -.