Jetta L4-2.0L (BEV) (2004)
Vacuum Brake Booster: Service and Repair
Brake Booster, Removing and Installing
Brake booster, removing and installing
Special tools and equipment
-
3094 Hose clamps
Removing
-
Obtain radio code on vehicles with coded radio.
-
Disconnect battery.
-
Clamp clutch master cylinder supply hose with special tool 3094.
-
Disconnect clutch master cylinder supply hose.
-
Remove control module and hydraulic unit
-
Disconnect vacuum hose from brake servo.
-
Remove trim below instrument panel.
-
Remove bolts -1-.
-
Remove cover -A-.
-
Remove connecting plate between clutch and brake pedals on vehicles with manual transmission.
-
Remove brake light switch -1-.
-
Separate brake pedal from brake booster.
-
Guide brake booster with brake master cylinder out forward and remove.
Installing