Jetta L4-2.0L (BEV) (2004)
/Page-567001.png)
Camshaft: Specifications
Tighten bearing caps 2 and 4 alternately and diagonally to ........................................................................................................................................ 20 Nm.
Coat contact surfaces of bearing cap 1 lightly with sealing compound AMV 174 004 01.
Install bearing caps 3, 1 and 5 and also tighten to ..................................................................................................................................................... 20 Nm.
Check radial clearance with Plastigage
Wear limit ............................................................................................................................................................................................................. 0.1 mm
Run-out: max ........................................................................................................................................................................................................ 0.05 mm
