Jetta L4-2.0L (BEV) (2004)
Intake Manifold: Service and Repair
Intake Manifold Lower Part, Disassembling and Assembling - II
Intake Manifold Lower Part, Disassembling And Assembling (vehicles With Engine Code BBW, BEV)
NOTE:
-
To prevent damage to catalytic converter the fuel system (without return hose to fuel rail) must be bled after repair work on fuel lines or on fuel
filter.
-
The vehicle must only be started after bleeding.
-
Bleed fuel system.
1. Wire routing
-
Clipped onto fuel distributor
2. Fuel rail
-
With bleeder valve item -13- for fuel supply system
3. Connection, supply line
4. To intake hose
-
Only for vehicles with engine code BBW
5. Air pipe
-
Only for vehicles with engine code BBW
6. Air hose
-
Only for vehicles with engine code BBW
-
For air cleaned fuel injectors
-
Check for secure seating
7. Fuel injectors (-N30- through -N33-)*
Vehicles with engine code BBW
-
Air cleaned
Vehicles with engine code BEV
-
Not air-cleaned
8. O-ring
-
Always replace