Jetta L4-2.0L (BEV) (2004)
Leak Detection Pump: Testing and Inspection
Leak Detection Pump (LDP), Checking
Recommended special tools and equipment
-
V.A.G 1526 multimeter or V.A.G 1715 multimeter
-
V.A.G 1594 connector test kit
-
Wiring diagram
Requirements
-
The respective fuses of Leak Detection Pump (LDP) -V144- must be OK.
-
Fuel Pump (FP) relay -J17- must be OK, check.
-
Ignition switched off.
Work sequence
-
Remove right rear wheelhousing liner.
-
Disconnect 3-pin connector of Leak Detection Pump (LDP) -V144- (arrow).
-
Measure resistance between terminals 1 + 3 of leak detection pump.
Specified value: 640 to 720 Ohms
-
Measure resistance between terminals 2 + 3 of leak detection pump.